Nidek Medical SE-9090 Supra, Service Manual

Page: 189 / 350

LLE7D*RDA002B
177
8.5 Measuring Window ASSY Position Adjustment
1 . Remove the exterior panel ASSY (40274-1200) (see 6.4 [p95]) .
2 . Display the hardware test screen (see 8.1.2 [p168]) .
3 . Loosen CK2 × 5.
4 . Turn SB3 × 8 on the rear of the measuring
ASSY to adjust the position of the shading
plate (40273-M695) and perform the fol-
lowing.
1 ) Close the lid (40271-M686) of the
measuring window ASSY (40273-
6200).
2 ) Confirm that LMU [org] turns red on
the hardware test screen.
5 . Press LMU [Front] on the hardware test
screen to move the lens measuring ASSY
(40274-6000) to the front and open the lid
(40271-M686) completely.
6 . Turn off and on the instrument breaker.
7 . After initialization, perform the following.
1 ) Close the lid (40271-M686) of the
measuring window ASSY (40273-
6200).
2 ) Confirm that LMU [org] turns red on
the hardware test screen.
8 . If they cannot be confirmed, repeat the adjustment.
9 . After adjustment, tighten CK2 × 5, then SB3 × 8.
Caution
The lid must be closed
with no gap.
Caution
The lid must be closed
with no gap.
5$˜
%-˜
/
$#
/