Nidek Medical SE-9090 Supra, Service Manual

Page: 269 / 350

LLE7D*RDA002B
257
8.14.10.5 Groove depth adjustment
1 . Display the menu screen (see 8.1.1 [p167]) .
2 . Press [Groove setting/adjustment] on the
menu screen.
3 . Perform adjustment so that the groove
depth is 0.3 ±0.1 mm by the procedure below.
1 ) Select the Adj. tab and press the
Groove depth adjustment field.
2 ) To increase the groove depth,
increase the parameter value.
3 ) To decrease the groove depth,
decrease the parameter value.
4 ) Enter the value with the numeric
keypad, then press the Enter key
.
5 ) Press [Exit] to return to the layout screen.
4 . Confirm the groove depth (see 8.14.10.4 [p256]) .
5 . Repeat adjustment until the groove depth is 0.3 ±0.1 mm.
6 . After adjustment, perform the following.
1 ) Backing up the EEPROM data (See 8.19.1 [p284].)
2 ) Groove axis check (See 8.14.10.6 [p258].)
㪸