Nidek Medical LM-7, Operator'S Manual

Page: 77 / 108

75
4. CONNECTION AND SETTINGS : Parameter Settings
4.2 Parameter Settings
Parameters include settings related to display, measurement, printing, communication, UV transmit-
tance measurement, and such.
1
Press the parameter button .
2
Display the page that has the parameter to be
set.
1)
Using the page change button , display
the page that has the parameter to be changed.
2)
Select the desired parameter item.
The background of the selected parameter item turns
green.
3
Press the exit button to return to the mea-
surement screen.
The changed parameter setting is saved.
4.2.1 Parameter setting table
• Underlined options indicate factory settings.
Parameter Setting contents
1 Step 0.25, 0.12, 0.06, 0.01 (D)
Display increments for measured data (D) (Axis and prism θ are always displayed in 1° incre-
ments.)
2 Cylinder +, ±, -
Cylinder display mode
+, -: The cylinder value is displayed in positive or negative reading.
±: When the refractive power at all axis angles is positive, the cylinder value is displayed in
positive reading.
Otherwise, the cylinder value is displayed in negative reading.
3 Prism Off, P-B, BU/D BI/O
Selects the method for displaying measured prism values.
Off: Not displayed
P-B: Displayed in polar coordinates
BU/D BI/O: Displayed in rectangular coordinates
1707141668223 承認済
Uncontrolled copy when printed.