Nidek Medical LM-7, Operator'S Manual

Page: 66 / 108

64
3. OPERATING PROCEDURE : Saving Data to Eye Care Card
3.13 Saving Data to Eye Care Card
The measured data is saved to the Eye Care card to transfer the LM data to the connected equipment.
• Each data of sphere, cylinder, axis, add, and prism for right and left lenses is saved.
• If data has the 2nd add power, it is saved.
• Prism data is saved in the format set by the Prism parameter.
1
Inset the Eye Care card while no measured data is locked in.
The Eye Care card icon changes from (white) to (blue).
2
After measurement, press the print button .
The Eye Care card icon changes to (green). When the data is written to the card successfully,
the icon changes to (blue).
3
When the Eye Care card icon changes to
(blue), pull out the card straight.
• When the lens side is not specified (single state), data is not written to the Eye Care card.
Even if the procedure for writing data is taken, data is not written.
• Only one item of LM data (a pair of frames) can be saved to the Eye Care card.
• Never remove an Eye Care card while it is being accessed.
• The Eye Care card icon is displayed as (green) while it is being accessed.
• The display of (red) indicates an error. The card may be removed.
If the card is removed while it is being accessed, data cannot be written properly. The Eye Care
card may be irreparably damaged.
• The data is written to the Eye Care card when the Auto print S or Auto print R/L parameter is set
to “On”.
• When the Eye Care card is inserted after measurement with measured data locked in, the data is
automatically written.
Eye
Ca
Eye
Ca
Eye
Ca
Eye
Ca
Eye
Ca
Eye
Ca
Eye
Ca
1707141668223 承認済
Uncontrolled copy when printed.