37
INTRODUCTION: Connecting the Main Body and Station
4
To remove the cable, hold down the clasp of the plug, then pull it out.
2.5.2
Connection by infrared (printer-equipped model only)
The main body and station communicate by infrared light.
Communication is possible both when the main body is placed on the station or separated from the
station.
O
Communication by placing the main body on the station
Placing the main body on the station enables a stable communication because the IR windows and IR
receptor are in direct alignment.
This communication method is suitable when the device is used in a location where it is exposed to
intense light such as sunlight or room illumination.
1
parameter to “IR”.
2
Place the main body on the station.
CAUTION
• Place the station in a location where the IR receptors are not exposed to intense light including infra-
red light, such as sunlight or room illumination.
Intense light entering the IR receptors may interfere with proper communication. Also, intense light
entering the measuring window may interfere with proper measurement. As necessary, shut out sunlight
with curtains or turn off the room illumination.
Clasp
Main body re-
ceptacle
