Nidek Medical ARK-1S, Operator'S Manual

Page: 67 / 112

61
OPERATING PROCEDURE: Measured Value Printing
3.11 Measured Value Printing

Measured values are printed out by pressing the print button after measurement.
The printing contents can be changed by parameter options “PRINT1” to “PRINT3”. Set the
parameters as necessary or desired.

“4.5 Device Parameter Settings” (page 77)
●
Sample printout 1
• When the “31. PRINT” parameter is set to “AUTO”, printing starts automatically when measurement
of both eyes is complete.
• When the RT or such is connected, printing and data communication are performed at the same
time.
Standard printing
A sample printout of AR/KM measurement with
the print parameters set to default
Printing of eye diagram
Pressing the eye print button prints the eye
diagram based on the AR median values (or the
latest values when median values have not been
obtained) or the subjectively measured values
when the subjective measurement has been per-
formed.