Nidek Medical AR-310A, Service Manual

Page: 104 / 218

XAR17ARDA001G/E
104
Return to previous page
8.1.2 CALIB MODE SELECT (for AR)
1 . Turn on the power switch while pressing
the L-1 and R-2 function buttons.
* Continue pressing the function but-
tons until a beep sounds.
2 . The CALIB MODE SELECT screen is dis-
played.
3 . Press the up or down button to
select each item.
4 . Press the execute button to enter
each adjustment mode.
8.1.3 ALIGNMENT CALIBRATION
1 . Turn on the power switch while pressing
the L-1 and R-4 function buttons.
* Continue pressing the function but-
tons until a beep sounds.
2 . Enter ALIGNMENT CALIBRATION mode.
8.1.4 Measurement mode
1 . Turn on the power switch while pressing the L-3 and R-1 function buttons.
* Continue pressing the function buttons until a beep sounds.
2 . Perform alignment of the model eye (CL)
(32961-0700), then measure the model
eye.
* The screen as shown to the right is for
the AR-330. The screen differs for
other models.
3 . Confirm that the numeric values displayed
on the screen conform to those described
on the model eye (CL) (32961-0700)
4 . After confirmation, turn off the power
switch.
.
&$/,%02'(6(/(&7
&+$57
:,1'2:&+(&.
$5
$5$;,6
$5&255(17
&85625%2$5'
#.+)0/'06%#.+$4#6+10
24'5556#46$76610
ᵏ
ᵏ
5 /
66
&&
$$
&</
㹊