manualshive.com logo in svg

Nidek Medical AFC-330, Operator'S Manual

Share
Download
Nidek Medical AFC-330 Operator'S Manual Download Page 37

21

BEFORE USE

: 

Screen Configuration

1

[

[Anterior eye observation screen - 5]

1. Focus gauge

Serves as a guideline for focusing.
In the fundus observation screen, activating the auto focus or rotating the focus knob moves the blue ball 
along the arc of the circle to show the degree of diopter adjustment.

2. Compensation lens

Displays the condition of the compensation lens.

: No compensation lens is inserted.

: The plus compensation lens is inserted.

: The minus compensation lens is inserted.

3. Flash intensity

Displays the set flash intensity (at the time of image capture). The flash intensity can be selected among 17
levels.

The flash intensity level is displayed numerically and by the amount of area colored orange along the scale.

4. Flash intensity up/down buttons

 Used to adjust the flash intensity for image capture in the range from FL1 to FL17.

 

: Used to reduce the flash intensity.

 

: Used to increase the flash intensity.

The default flash intensity differs depending on the specified ISO speed of the camera.

ISO 100: FL13
ISO 200: FL9
ISO 400: FL5

The default setting can be changed in the Photography options screen.

1. Focus gauge

2. Compensation lens

3. Flash intensity

4. Flash intensity up/down button

Summary of Contents for AFC-330



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands