manualshive.com logo in svg

Nidek Medical AFC-330, Operator'S Manual

Share
Download
Nidek Medical AFC-330 Operator'S Manual Download Page 127

111

OPERATING PROCEDURE

: 

Control Menu

2

3

When the setting is complete, press the Menu button.

The Control menu 1/2 screen is displayed.

2.9.2

Photography settings

Photography modes

1 

Press the Photography Modes button in
“Photography settings”.

The Photography Modes screen is dis-
played.

2

Set the parameters for photography
modes.

Contrast

1 - 50 - 100%

, 

: 1% increments

, 

: 10% increments

Brightness

1 - 50 - 100%

• Depending on the setting of the internal fixation lamp, the entire image information cannot

be viewed. In such a case, change the “Pan image layout” setting from Align to EX.

• The “Contrast” and “Brightness” settings are only for the LCD touch-screen. They do not

have any effect on the contrast or brightness of captured images.

Item

Options

[Control menu 1/2]

Summary of Contents for AFC-330



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands