Nicolaudie Wolfmix W1, Reference Manual

Page: 20 / 53

Move FX
Displayed data:
●
Four buttons along the top to indicate which groups have Move FX enabled.
Shift + hit the BPM TAP button to toggle between groups AD and EH.
●
Eight buttons to select the Move Fx type.
●
Speed, Phase, Order, Size, Fan, Fade and Flick FX properties.
Encoder actions:
●
Move the first encoder to control the FX speed. This is controlled either by a
linear % or a BPM division depending on the Sync mode. Pushing the encoder
toggles between Clock, BPM, and Audio Pulse (mic/line in) sync.
●
Move the second encoder to adjust the Phase or Order. Pushing the encoder
toggles between Phase and Order mode. Phase is controlled as a %. Order will
change the fixture order consequently playing the effect forwards, backwards,
symmetrically inwards and symmetrically outwards.
●
Move the third encoder to control the FX Size or Fan. Pushing the encoder
toggles between Size and Fan properties.
●
Move the Fourth Encoder to control the FX Fade. Pushing the encoder enables
Flick mode which increases the fade time over 100% of the step time (the time
between position points). This consequently creates a ‘Flick’ effect as the fades
are cancelled part-way through.
Other actions:
●
Tapping the eight FX selection buttons changes the FX type and recalls
associated properties.
●
Tapping the four buttons at the top of the screen, or hitting one of the buttons
on the top row of the matrix turns the FX on and off for each group.
●
Tapping one of the 16 light green buttons on the matrix adjusts the position of
the entire effect to the top left, top, top right, right, bottom right, bottom,
bottom left, left and center.
●
Tapping the ‘Edit’ button when a sequence effect type is selected opens the
sequencer.
20