Channel editor screen
Displayed data:
●
Channel number and type
●
A collection of feature buttons depending on the channel type. These may
include colors, gobos and strobe. Each button displays the feature value.
Encoder actions:
●
Move the first encoder to change the value of the selected feature. Push the
encoder to apply the change.
●
Move the second encoder to reset all features on the channel or reset just the
selected feature. Push the encoder to apply.
●
Move the fourth encoder to assign the channel to a beam.
Toolbar actions:
●
Delete the channel. (only available on the last channel of the fixture)
●
Tapping the back button will go back to the fixture channels screen.
Other actions:
●
Tapping the large icon to the left of the channel number allows for the channel
type to be changed.
●
Tapping any of the feature buttons will display the associated feature values on
the bottom bar, allowing for the values to be changed via the encoders.
●
Hitting the flashing matrix button will go back to the fixture channels screen.
16
