16
EN
CONNECTING THE CAMERA TO PHONE VIA WIFI
First (free) download the Ez iCam App application into your phone, not opening it yet. Further
steps are as follows:
1.
Press the lower button (WiFi) on the camera side to activate WiFi in the device.
2.
Open the settings on your phone and make connection to your camera’s WiFi network
(“ICam VEGA 4K“, password: 1234567890)
3.
Once connected already, you may open the application and start operating the camera
via your phone. Press the below arrow for 3 seconds to deactivate WiFi.
REMOTE CONTROL
PAIRING
There is no need to pair the remote control unit to camera as the control will automatically
start working with the camera as soon as the micro SD card is inserted in the camera.
VIDEO SHOOTING
First check that the camera is in the Record Mode.
Press the “video-button” to start up/stop recording.
TAKING PHOTOGRAPHS / SEQUENTIAL PHOTO / TIME-COLLECTION
First check that the camera is in one of the relevant modes.
Press the “photo-button” to take a photograph, sequential photographs or time-selection.
TURNING THE CAMERA OFF
Press and hold for a few seconds the “photo-button” to turn the camera off.
PROPERTY
•
Reach 30m
•
Water-resistant (not waterproof!)
Summary of Contents for VEGA 4K
Page 42: ...42 ...
