Nice SlideSmart CNX 15, Installation And Programming Manual, Page: 21 / 48

MX4779 REV. A ©2019 SLIDESMART CNX 15 BASIC MANUAL www.hysecurity.com 21
Figure 25. SmartCNX Controller Connections
1 2 3 4 5
6
10 11
7
12 14 16
13 15 17
18 20 21
24 25 26 27
23
8
28
9
19
22
1. Hy5B EXIT Loop – This opens a fully closed
gate or reopens a closing gate.
2.
Hy5B INSIDE Loop –
Reversing loop on secure
side.
3. Hy5B OUTSIDE Loop – Reversing loop on
public side.
4. Hy5B CENTER Loop – Detect vehicle in swing
arc of the gate
5. (Not Used)
6.
OXI Antenna
7. (Not Used)
8. Stop/Buzzer Harness
9. Relay 1 – Mechanical relay
10.
Relay 2 –
Solid state relay
11.
Relay 3 –
Solid state relay
12. HS-2 – Can connect to expansion module.
13. HS-1 – Harness connects communication to
drive module.
CONTROLLER CONNECTIONS
14. RS485
15.
T4 Port
16. Ethernet
17. USB – Used for software updates & fault log
download.
18. Sequenced Gate Connection
19.
Dual Gate
20.
BlueBUS –
For use with NICE BlueBUS devices
21. Programmable Inputs 1-3
22. Programmable Sensor Inputs 1-2 – UL 325
required external entrapment sensors
23. Emergency – Programmable to fire department
open or emergency close
24.
Remote –
Programmable for three functions,
defaults to step function
25. Close – Close only input
26. Open – Open only input
27. Stop – Stop and reset input
28.
OXI –
Radio for NICE access control "clickers".