language 4.6
Choose the language that you want the
information to be displayed in here.
HOLIDAY SETTING
holiday setting4.7
activated
start date
stop date
heating
desired room temperature
hot water
cooling
ventilation
0
economy
off
normal
20.0°
off
pool
To reduce energy consumption during a
holiday you can schedule a reduction in
heating and hot water temperature.
Cooling, ventilation, pool and solar panel
cooling can also be scheduled if the
functions are connected.
If a room sensor is installed and activ-
ated, the desired room temperature (°C)
is set during the time period. This setting
applies to all climate systems with room
sensors.
Menu
4.7
If a room sensor is not activated, the desired offset of the heating curve is set.
One step is usually enough to change the room temperature by one degree, but
in some cases several steps may be required. This setting applies to all climate
systems without room sensors.
Vacation scheduling starts at 00:00 on the start date and stops at 23:59 on the
stop date.
TIP
Stop the holiday setting about a day before your return so that room
temperature and hot water have time to return to their usual levels.
TIP
Set the vacation setting in advance and activate just before departure
in order to maintain the comfort.
ADVANCED
Menu
4.9
NIBE VVM 225
Chapter 3 | VVM 225 – at your service
70
