Regular checks
You should check your installation at regular intervals.
If anything unusual occurs, messages about the malfunction
appear in the display in the form of different alarm texts.
Saving tips
Your installation produces heat and hot water. This occurs
via the control settings you made.
Factors that affect the energy consumption are, for example,
indoor temperature, hot water consumption, the insulation
level of the house and whether the house has many large
window surfaces. The position of the house, e.g. wind expos-
ure is also an affecting factor.
Also remember:
•
Open the thermostat valves completely (except in rooms
where you want it to be cooler). This is important, as fully
or partially closed thermostat valves slow the flow in the
climate system, which results in the installation working
at a higher temperature. This in turn can lead to increased
energy consumption.
•
You can lower the operating cost when away from home
by scheduling selected parts of the system. This is done
in menu 6 - "Scheduling".
•
If you select "Small" in menu 2.2 - "Hot water demand",
less energy is used.
NIBE SMO S40
Chapter 5 | Maintenance of SMO S40
12
Maintenance of SMO S40
