Nibe BA-SVM 10-200 Series, Installation And User Manual

Page: 6 / 88

6 NIBE BA-SVM 10-200
2 Delivery and handling
Transport
Available models
Compatibility
Assembly
The BA-SVM 10-200 indoor unit should be transport-
ed and stored vertically in a dry place. However,
BA-SVM 10-200 may be carefully laid on its back
when being moved into a building.
BA-SVM 10-200 units include the following separate
models:
• BA-SVM 10-200/6 E - unit dedicated for use with
AMS 10-6, enamelled tank equipped with a tita-
nium anode,
• BA-SVM 10-200/12 E - unit dedicated for use
with AMS 10-8 and AMS 10-12, enamelled tank
equipped with a titanium anode,
• BA-SVM 10-200/6 E EM - unit dedicated for use
with AMS 10-6, enamelled tank equipped with a
titanium anode, and energy meter,
• BA-SVM 10-200/12 E EM - unit dedicated for use
with AMS 10-8 and AMS 10-12, enamelled tank
equipped with a titanium anode and energy me-
ter,
• BA-SVM 10-200/6 R - unit dedicated for use with
AMS 10-6, stainless steel tank,
• BA-SVM 10-200/12 R - unit dedicated for use with
AMS 10-8 and AMS 10-12, stainless steel tank.
• BA-SVM 10-200 must be placed on a solid, water-
proof surface that will support the weight of the
filled indoor unit. Use the adjustable feet of the
indoor unit for horizontal and stable positioning of
the appliance.
• Since BA-SVM 10-200 has condensation water
drainage, the set-up location of the indoor unit
should be equipped with a floor drain leading to
the sewage system.
20-40 mm
Wrench size 13
The BA-SVM 10-200 indoor unit can be used with
Split type outdoor units. The compatible NIBE SPLIT
heat pumps are:
Symbol Application
AMS 10-6 BA-SVM 10-200/6
AMS 10-8
BA-SVM 10-200/12
AMS 10-12
You can find more information on NIBE SPLIT heat
pumps at www.nibe.eu and in the relevant instruc-
tions for installation and use.
In the Accessories section, you can check the list of
accessories that can be used with BA-SVM 10-200.
Section 2 | Delivery and handling