Nibe AHP S300, Installer Manual

Page: 8 / 28

Removing the covers
FRONT COVER
UN
1. Disconnect the front cover at the top edge and pull
it straight out.
2. Lift the front cover upwards.
SIDE COVERS
UN
U
N
U
N
The side covers can be removed to facilitate the install-
ation.
1.
Remove the screws from the upper and lower
edges.
2.
Twist the cover slightly outward.
3.
Move the hatch backwards and slightly to the side.
4. Pull the cover to one side.
5. Pull the hatch forwards.
AHP S/ AHPS S/ AHPH S Chapter 2 | Delivery and handling 8