NI PXIe-1082DC, User Manual

Page: 42 / 66

A-8 | ni.com
Appendix A Specifications
PXIe_SYNC_CTRL
V
IH
.....................................................................2.0-5.5 V
V
IL
.....................................................................0-0.8 V
PXI Star Trigger
Maximum slot-to-slot skew ..............................250 ps
Backplane characteristic impedance.................65
Ω ±10%
Notes
For PXI slot to PXI Star mapping refer to the System Timing Slot section of
Chapter 1, Getting Started .
For other specifications refer to the PXI-1 Hardware Specification .
PXI Differential Star Triggers (PXIe-DSTARA, PXIe-DSTARB,
PXIe-DSTARC)
Maximum slot-to-slot skew ..............................150 ps
Maximum differential skew..............................25 ps
Backplane differential impedance.....................100
Ω ±10%
Notes
For PXIe slot to PXI_DSTAR mapping refer to the System Timing Slot
section of Chapter 1, Getting Started .
For other specifications, the NI PXIe-1082DC complies with the PXI-5 PXI Express
Hardware Specification .
Mechanical
Overall dimensions
Standard chassis
Height................................................6.97 in. (177.1 mm)
Width.................................................10.68 in. (271.4 mm)
Depth.................................................15.61 in. (396.5 mm)
Note
0.57 in. (14.5 mm) is added to height when feet are installed. When tilted with
front feet extended on table top, height is increased approximately 2.08 in. (52.8 mm)
in front and 0.583 in. (14.8 mm) in rear.
Weight ...............................................................19.4 lb (8.8 kg)
Chassis materials...............................................Sheet Aluminum (5052-H32, 3003-H14, and
6061-T6), Extruded Aluminum (6060-T6), and
Cold Rolled Steel, PC-ABS, Santoprene, Nylon