NI 5752 Getting Started Manual Download Page 5

Page: 5 / 16

Figure 1.

NI 5752/5752B with NI SMB-2147 and NI SMB-2148 Signal Accessories

NI PXI-1042

SMB-2147

Analog Input Accessor

AI 3

AI 7

AI 2

AI 6

AI 5

AI 1

AI 0

AI 4

AI 11

AI 15

AI 14

AI 10

AI 13

AI 9

AI 12

AI 8

1. PXI Chassis with FlexRIO FPGA and adapter

module

2. NI SMB-2147

3. NI SMB-2148
4. SHC68-C68-D4 Cable Assemblies

Unpacking

Caution

To prevent ESD from damaging the devices, ground yourself using a

grounding strap or by holding a grounded object, such as your computer chassis.

Touch the antistatic package to a metal part of the computer chassis.

Remove each module from the package and inspect it for loose components or any other
sign of damage.

Caution

Never touch the exposed pins of connectors.

Note

Do not install a device if it appears damaged in any way.

NI 5752/5752B Getting Started Guide

Summary of Contents for 5752

















Search results

Summary of Contents for 5752

Reviews:

Related manuals for 5752

Brands by name

Popular brands

NI 5752, Getting Started Manual

Search results

Summary of Contents for 5752

Reviews:

Related manuals for 5752

Brands by name

Popular brands