NGM Vanity touch, User Manual, Page: 13 / 49

Vanity Touch User Manual
13
SIM1 / SIM2 / both new
emails
Earphone plugged in
Profile ring mode
Profile silent mode
Vibrate and ring
Vibrate then ring
Profile Vibrate mode
Call Key
Call key
It is the key used to make a call, see the bar at the bottom of the screen. Tapping the button switches the
screen to call, where you see a virtual keyboard, after typing a phone number select button 1or 2 on the bottom
bar to make the call, respectively, via SIM1 orSIM2 away. In Idle mode, press one of these buttons to display a
list of recent calls (SIM1 and SIM2, respectively, 20 voices support, including incoming
calls, missed calls and dialed calls). Select a contact list and press the button again SIM1 or SIM2 button to call
the number.
Keypad lock
Keypad Lock
To lock the keypad, press the button on/off. The activation of the block will be immediate.
To unlock the keypad, press the same button again briefly, or the function key (HOME), and then follow the
onscreen instructions. It will automatically display the last screen used.
The keypad is locked when an incoming call, press the answer button to accept, at the end, the keypad
automatically locks again.