Quick Nav
Table of Contents
Introduction
I/O Module Panel Layouts
Snare and Tom Trigger Zones
NFUZD USB Key (Drive) and Data Management
NSPIRE Series I/O Module Navigation
Trigger Settings
Hi-Hat (HH) Trigger Settings
Kit Menu
Reverb
EQ
Mixer Menu
Saving a UserKit
Adjusting the MIDI Map
Trigger Function Settings
Click Menu
SEQ Menu
Integration with Computer
Setup Suggestions
Sync Key
Auto O
ff
and Sleep Mode
BFD Eco NFUZD Edition
NSPIRE Series I/O Module Settings
Getting Started w/ BFD Eco NFUZD Edition
Basic Mixing Adjustments
BFD Eco NFUZD Edition E
ff
ects
Grooves Page
Options Menu
Help Menu
Changing BFD Eco NFUZD Edition Presets
Changing Drum Sounds
Adjusting Instrument Parameters
FX Slots
Instrument and Mixer Faders
Getting New Professional Sounds
User .wav Samples
Exporting Sound Banks
Loops
Installing Sound Banks
BFD Eco Jukebox Player
BFD Eco Master Output Recording
BFD Eco Mixing Tips
Included Sounds
Basic Mixing Adjustments (cont.)
Filter Mod
This is a DCAM circuit-modelled multimode resonant filter with modulation and drive. As well as the
Pitch
(cuto
ff
frequency) and
Res
(resonance) controls, the filter features a
Mode
control to switch
between low-pass, band-pass, high-pass, peak and notch modes. There is even an audio-rate
FMDepth
control which sets the amount of cuto
ff
modulation derived from the input signal’s waveform. The Drive
function features controls for input (
Drive
) and output (
OutDrive
) drive stages. The e
ff
ect contains a
built-in envelope follower for modulating the cuto
ff
frequency with the amplitude of the input signal.
It features controls for
Attack
,
Release
, and
Env
Depth
.
Drive
Drive is a versatile, DCAM-modelled overdrive/distortion e
ff
ect. The
HPFreq
and
LPFreq
controls allow
you to filter the signal before the distortion stage, while the
Mode
control switches between four di
ff
erent
distortion models:
Diode
,
OTA
,
OpAmp
and
HalfRect
. The
Dirty
control sets the amount of the
distorted signal that is heard at the output, while the
Clean
control sets the amount of the signal that
is filtered out before the bitcrushing stage by the high-pass and low-pass filters. The
Tone
control is
a simple 1-pole low-pass filter to remove unwanted high frequencies from the Dirty signal.
4 7
