NF ZM2371, Instruction Manual

Page: 123 / 255

4.10 Initializing of All Settings
4-36 ZM2371/ZM2372
4.10 Initializing of All Settings
ZM2371 / ZM2372
can be initialized in some levels.

Initializing the current setting while the contents of setting and correction value
memory are being left over
_ SHIFT _ + [ INIT ]
Press the
_ SHIFT _ + [INIT]
keys to display the initializing menu.
I N I T I A L I Z E
1 ) E x e c u t e
Option
D o n e
Completion message
Press the
_ 1 _
key and select the Execute, and the current setting and correction value
return to the initial values.
After execution, the completion message appears for a short time and measurement
screen comes back.
The following setting cannot be initialized but retained:
1) Contents of setting and correction value memory
2) Setting of interface (GPIB, RS-232)
3) Trigger polarity of handler interface
_ 0 _ | [INIT]
_ SHIFT _