NF WAVE FACTORY WF1967, Instruction Manual (Operations

Page: 71 / 330

4.3 Basic Settings and Operations
WF1967/WF1968
4-21
4.3.7 Operations Available on Utility
a) Displaying the Utility menu
b) Utility menu
•
Initialization [Reset]
Performs a reset of the settings. Restoring the settings to the initial state will turn off the
output for continuous oscillation, sine wave, 1kHz, and 0.1Vp-p/open.

P.4-23
•
External Addition Settings [ExtAdd]
Sets the external addition gain. Available settings are off, 0.4x, 2x, and 10x.

P.4-42
• Phase Synchronization Operation [φ Sync]
Handles the synchronization between multiple units when they are connected together and
synchronization between channels on the WF1968.

P.8-6, P.9-4
•
User Defined Unit Settings [User Unit]
Sets the user defined units.

P.12-3
•
Output and Sequence at power-on [Power-On State]
Determines the output on/off settings when the power is turned on and the automatic
When the MENU key is pressed, the top
menu opens. Then, select Utility. This
opens the Utility menu.
Initialization
External addition
setting
Output and Sequence
at power-on
User-defined unit
settings
Color and Brightness
Sound ON/OFF
System Information
Channel mode Settings
(WF1968 only)
2-channel identical
setting ON/OFF
(WF1968 only)
External 10MHz frequency
reference ON/OFF
External 10MHz
frequency reference
state display
Phase synchronization
operation
REMOTE I/F select
Modify direction setting
Self-Diagnosis
Copying parameters
between channels
(WF1968 only)
Frequency reference
output ON/OFF