NF FRA5022, Instruction Manual

Page: 57 / 145

3.5 Basic Operations
FRA5022
3-27
3.5.6 Spot Menu Screen
The Spot Menu Screen allows you to set items for spot measurement.
Figure 3-11 Spot menu screen
□
Setting memory selection: SETTING memory
□
Setting memory title: TITLE
□
Oscillator frequency: OSC frequency
□
Oscillator AC amplitude: OSC ac amplitude
□
Oscillator DC bias: OSC dc bias
□
The items marked with a solid white square mark are shared with the sweep
measurement screen. For the details, refer to the descriptions of the sweep
measurement screen.
Displays the
options available
for the selected
item.
Setting value
Setup items:
select with the
Up/Down cursor
keys
.
Scrollbar:
Indicates the
approximate position
of the current item in
the window when the
entire menu cannot
be fully displayed.
Three sub-menus: select with the Left/Right cursor keys
△ ▽ .
MEAS delay time
= 0.05
0.00 to 999.99 s
REPEAT on/off
MEAS mode
MEAS integ
.
time
MEAS integ
.
cycle
MEAS delay time
DISP data memory
DISP coordinates
DISP phase min
-180deg
GdB,P-F
A
0.00s
2c
0.50s
CH2/CH1
On
M E N U < S Y S T E M > < S W E E P > < S P O T >
▲
▼