NF DP060LM, Instruction Manual, Page: 80 / 307

3. Basic Operation
PROGRAMMABLE AC POWER SOURCE 62
2. In the [Target Phs] item, select the phase of which the measured value is to be displayed. For the
line voltage, select L1-L2, L2-L3, or L3-L1.
3. Close the window. For how to close the window, see 3.3.4 .
  Operation procedures by using shortcuts
1. + Switches the target phase of which the measured value is displayed
Press the SHIFT key to enter the shift state (the SHIFT LED illuminates). When you press the 2
key in the numeric keypad in the shift state, the phase is switched in the order of
L1

L2

L1-L2

L1 ... in the single-phase three-wire. In the three-phase, it is switched in the
order of L1

L2

L3

L1-L2

L2-L3

L3-L1

L1 ...