NF DP060LM, Instruction Manual, Page: 74 / 307

3. Basic Operation
PROGRAMMABLE AC POWER SOURCE 56
2. Select the [Type] item. In the displayed selection box, select the desired measuring mode.
3. Close the window. For how to close the window, see 3.3.4 .
  Operation procedures by using shortcuts
1. + Switching the display format of the measured values
Press the SHIFT key to enter the shift state (the SHIFT LED illuminates). When you press the 3
key of the numeric keypad during the shift state, the measuring mode is switched in the
following order: RMS, AVG, Peak, RMS. Some measuring modes may be skipped and cannot be
selected depending on the AC/DC mode.