NF DP060LM, Instruction Manual, Page: 46 / 307

3. Basic Operation
PROGRAMMABLE AC POWER SOURCE 28
3.1 Component Name
3.1.1 Front
2
2. Control panel
3. Remote controller
connector
4. USB memory connector
5. Front grill
6. Power switch
7. Caster
8. Adjuster foot
DP060LM / DP120LM DP180LM
1. Eyebolt
*Only DP120LM and DP180LM
Figure 3-1 Component Name (Front)
Table 3-1 Component Name (Front)
No. Name Description Refer to
1 Eyebolt Used to suspend and move the product with
a crane.
(Only DP120LM and DP180LM)

2 Control panel Configures the settings and turns the output
on or off. Information such as setting values
and measured values is displayed on the
LCD screen. 3.1.3
3 Remote controller
connector
Optional remote controller can be connected. 7.1
4 USB memory connector USB memory can be connected. 4.9
5 Front grill The fresh air inlet. An air filter is attached. 10.2
6 Power switch Turns the power on/off. 3.2
7 Caster In DP060LM / DP120LM, caster with the
freely movable front-wheels and fixed
rear-wheels. In DP180LM, caster with all
the freely movable.
Can be used to move this product in the
horizontal location. 2.3
8 Adjuster Foot Can be used to fix this product temporarily
in the horizontal location. 2.2