NF DP060LM, Instruction Manual, Page: 35 / 307

2.5 Output Cable Connection
DP060LM/DP120LM/DP180LM
17
2.5 Output Cable Connection
  Before connecting, check the followings.
 Be sure to turn off the power switch of this product and switch off the breaker at the distribution
board, before touching the output terminal. Otherwise, an electric shock might occur.


 About output terminal
The output terminal is divided into two terminals, polyphase output terminal and single-phase output
terminal as shown in Figure 2-5. Single-phase output terminal is used in single-phase two-wire
output (1P2W), Polyphase output terminal is used in single-phase three-wire output (1P3W) and
three-phase four-wire (3P4W). Table 2-6 shows the screw sizes of the output terminals of each
model.
Power input
terminal
Sensing input terminal
Sigle-phase output
terminal
Polyphase output
terminal
Used in
1P3W, 3P4W
output.
Used in
1P2W output.
DP060LM / DP120LM
DP180LM
Power input terminal
Sensing input terminal
Single-phase output
terminal
Polyphase output
terminal
Powe input
panel
Output panel
Power input and
output panel
Polyphase output
panel
Figure 2-5 Terminal Block Layout
Power input terminal of this figure is for power input three-phase three-wire.
WARNING