NF DP060LM, Instruction Manual, Page: 293 / 307

11.29 USB Memory Interface
DP060LM/DP120LM/DP180LM
275
RS232 interface *69 *70
Item Description or Selection Factory default
Terminal D-sub 9-pin (male, UNC #4-40 screw)
Baud rate 9600 / 19200 9600 bps
Terminator “CR” “LF” / “CR” / “LF” “CR” “LF”
Parity None/Odd/Even None
Stop bit 1 / 2 1 bit
Data bit 7 / 8 8 bit
Flow control None/Hardware/Software None
*69 ： Binary transmission is not supported.
*70 ： Use a cross cable.
GPIB interface (IEEE488.1 std 1987) *71 *72
Item Description or Selection Factory default
Address 0 to 30 2
Terminator “LF”
*71
：
Binary transmission is not supported.
*72
：
Query for the main unit status byte using a serial poll is not supported.
LAN interface (IEEE802.3, LXI 1.4 Core 2011) *73
Item Description or Selection Factory default
Terminal RJ-45 modular jack
Transmission method Ethernet(100BASE-TX / 10BASE-T)
Communication protocol SCPI-RAW
Terminator “LF”
IP address setting
Auto, Fixed Auto
*73
：
Binary transmission is not supported.
11.29 USB Memory Interface
Commercial USB memory sticks can be used.
Description
Available memory *74 USB 1.1 or USB 2.0-compliant product
Connector USB-A (front panel)
Format FAT32
Writable/readable
contents
Basic Setting Memory, Sequence, Simulation, arbitrary wave
File operation *75 Create dedicated directory, rename, load, and save
2-byte characters (Japanese, etc.) are not supported.
*74
：
We do not guarantee that all USB memories can be operational with this product.
*75
：
The time stamp recorded on a file is different from the actual date and time.