NF DP060LM, Instruction Manual, Page: 290 / 307

11. Specifications
PROGRAMMABLE AC POWER SOURCE 272
11.26 Self-diagnosis/Protection Function
At power-on Description
ROM check Checks the internal ROM.
RAM check Checks the internal RAM.
Basic setting
Memory check
Checks the Basic Setting Memory.
System Setting Memory
check
Checks the System Setting Memory.
Waveform Memory check Checks the Waveform Memory.
Sequence Memory
check
Checks the Sequence Memory.
Simulation Memory
check
Checks the Simulation Memory.
Adjustment value memory
check
Checks the adjustment data memory.
Version check Checks the version of the internal software.
Output phase
configuration check
Checks the output phase configuration.
While energizing Description
Abnormal output Turns off the panel display and output when an output overvoltage or
overcurrent is detected.
Power unit error Turns off the panel display and output when a power unit error is detected.
Internal control error Turns off the panel display and output when an internal communication or
other error is detected. Also stops all the operations excluding power-off.
11.27 External Control Function
The following functions can be selected.
Item Description
Disable Disable the control input of the CONTROL I/O. The status output signal is output.
（ See 11.27.1 ）
Enable
Enable the CONTROL I/O. （ See 11.27.1 ）
DevCtrl
You can control DIP or RIN.
（
See 11.27.2
）