NF DP060LM, Instruction Manual, Page: 220 / 307

5. Description of Screen and Menu
PROGRAMMABLE AC POWER SOURCE 202
5.2 Menu Composition
The menu composition of this product is shown in Figure 5-2. Press the MENU key to move to the
root menu.
Root
Continuous Sequence Simulation Memory System
－
Osc
－ Measure
－
Misc
－ Limiter
－
Sequence Edit
－ Sequence Control
－
Simulation Edit
－ Simulation Control
－
Setting Store
－ Setting Recall
－
ARB Copy
－ SEQ Store
－ SEQ Recall
－
SIM Store
－ SIM Recall
－
Reset
－ PwON Mode
－
PwON Output
－ Beep
－ LCD
－
Monitor
－ Ext Control
－
Remote
－
Relay Cntrl
－ USB Eject
－
Trig Out
－
PU-ON
－ Information
－
ExtOut Pol
－ OutPhsMd
Figure 5-2 Menu Composition
5.2.1 Menus of the Continuous Function
The menus of the Continuous function are shown in Table 5-5. You can open each menu by using a
soft-key.
Table 5-5 Menus of the Continuous Function
Menu Description Refer to
Osc 1: AC/DC Switches the AC/DC mode. 3.4.2
2: Source Switches the signal source. 3.4.2
3: Range Switches the output voltage range. 3.4.3
4: On/Off Phs Makes the on/off phase settings. 3.4.8
5: Target Phs Switches the phase to be configured. 3.4.6
6: Phs Mode Sets the phase mode in the case of
polyphase output. 4.15
Measure 1: Mode Switches the measured value display mode. 3.4.12
2: Measure Makes the measured value display settings. 3.4.11,3.4.13 ,
3.4.14
3: Harmonic Displays the harmonic current measured
values. 4.4
4: Disp Item Selects display items in the Simple
measured value display mode. 3.4.12
Misc 1: AGC/Acal Makes the AGC/Autocal function settings. 4.12,4.13
2: DC Adjust Sets the DC offset adjustment. 4.14