NF DP060LM, Instruction Manual, Page: 219 / 307

5.1 Screen Configuration
DP060LM/DP120LM/DP180LM
201
5.1.3 Output Setting Display Items
The items displayed in the output setting display area are shown in Table 5-4.
Table 5-4 Output Setting Display Items
Item Description
Icon Represents the phase to be configured.
Output of the single-phase two-wire
All phases in the balanced mode single-phase three-wire, phase voltage setting
All phases in the balanced mode single-phase three-wire, line voltage setting
L1 phase in the unbalanced mode single-phase three-wire
L2 phase in the unbalanced mode single-phase three-wire
All phases in the balanced mode three-phase, phase voltage setting
All phases in the balanced mode three-phase, line voltage setting
L1 phase in the unbalanced mode three-phase
L2 phase in the unbalanced mode three-phase
L3 phase in the unbalanced mode three-phase
Freq Frequency of the output AC voltage
Wave Waveform of the output AC voltage
ACV Output AC voltage
DCV Output DC voltage
Gain Gain of the external signal
Source Synchronization signal source
5.1.4 Warning and Error Display
If a warning or error occurs, an error message is displayed in the measured value area and the output
display area. For details on error messages, see
9.1
.