NF DP060LM, Instruction Manual, Page: 119 / 307

4.2 Using Sequence Function
DP060LM/DP120LM/DP180LM
101
  Sequence Control View (output on state/sequence stopped)
Figure 4-10 Sequence Control View (Output On State/Sequence Stopped)
4.2.13 Change Output Parameter during Output ON
Frequency and voltage of step No.0 can be changed on Sequence Edit View and it can be used like
Continuous output function. Remote Sensing function and Autocal function can be enabled. See
4.11
and 4.13 for detail of Remote Sensing function and Autocal function.
1. Select frequency and voltage, input them in the Sequence Edit View step No.0 and turn ON output,
setting voltage will be output. Changing setting value, it will be applied soon.
Frequency setting Voltage setting
Measured value to be
displayed
Output setting of
step No.0
Icon