17
Installing the Tapered Pins in the Floating Lid
For these steps you will need the following parts:
•
(4) Threaded Tapered Pins
•
7/32” Drill Bit
•
Phillips Screw Driver
•
Cabinet Lid
•
(Optional) Wood Glue
•
(Granite Only) Epoxy
UP
DOWN
Step 23:
Fully retract the lift by pressing the DOWN button on the Remote
or Wired Backup Switch.
Note:
If you need to stop the lift at any point, tap the UP button to stop it.
Step 24:
Place the Cabinet Lid on top of the Top Plate and position it so it is centered within the enclosure
cutout.
Step 25:
Run the lift up by pressing the UP button on the Remote or Wired Backup Switch. Ensure the lid
stays in position and is not bumped, shifted, or moved out of place.
