Z-CLIP AND UM1 BRACKET
SPEAKER INSTALLATION
Page 1: ...Z CLIP AND UM1 BRACKET SPEAKER INSTALLATION ...
Page 2: ...sing the provided 10 screws Fig 2 5 Mount and level the second z clip to the wall Hitting studs on horizontal speakers is recommended Fig 3 6 For non stud mounting only use hardware rated to carry the weight of the speaker 7 Connect the speaker wires to the terminals located on the back of the speaker 9 If applicable funnel the wires into cable management channels and cover w black tape 10 Install...
Page 3: ...t the UM1 bracket arms until the depth support slotted bracket fits snuggly onto the back of the speaker You will be able to fine tune the height depth and tilt at the end of the install Fig 3 5 Lay your display wall mounts bracket arms over the UM1 bracket arms and secure to the back of the display making sure that the bolts not provided pass through both the display wall mount bracket arms and t...
Page 4: ...eaker from the bottom of the display The depth adjustment bracket arms should still be screwed into the back of the speaker 8 Lift and mount the display onto wall following the instructions provided by the mounts manufacturer 9 Lift the speaker and re attach to the UM1 bracket arms with the bolts and nylon nuts that you removed in step 7 10 Adjust the height depth and tilt features of the UM1 brac...
