Cel-Fi Indoor
Omni Antenna
A52-V32-100
Cel-Fi Wideband
Panel Antenna
A11-V43-100
Cel-Fi Wideband
Directional Antenna
A32-V32-100
Cel-Fi Mobile Mag
Mount Antenna
A41-V21-100
A41-V21-101
Cel-Fi Mobile Bolt
Mount Antenna
A41-V36-100
A41-V36-101
Cel-Fi Whip
Antenna
A21-V33-100
Cel-Fi Mobile
Server
Antenna
A41-V30-100
Cel-Fi Mount
Antenna
A62-V44-100
Cel-Fi Trucker
Antenna
A21-V31-100
Cel-Fi Marine
Antenna
A11-V37-100
Cel-Fi
Antenna
Mount
F66-100
Cel-Fi
Pole Mount
F26-100
User Interface
-eng_19-0730
Cel-Fi
GO+ All-in-One
Quick Start Guide
Smart Signal Booster
™
Basic Functionality
The Cel-Fi GO+ All-in-One Smart
Signal Booster Smart Signal
Booster is designed to improve
cellular coverage in a building,
remote area, or vehicle. Cel-Fi
GO+ connects to an external
Donor Antenna to draw in a cellular signal from the macro
network, and redistribute signal via the Server Antenna.
Cel-Fi WAVE App
The Cel-Fi WAVE app provides a User
Interface to Cel-Fi systems. The app’s
dashboard shows the system “Boost”
value that is a numeric representation
mapped to the amount of Signal Gaivn the
system is providing. Higher is better, with
nine (9) being the highest value. Cel-Fi
WAVE is the registration and management
application that allows users to setup
antenna, modes, and carriers. Cel-Fi WAVE
app is available through either the
Play Store
or
Apple App Store
; depending
on the mobile device.
Cel-Fi GO+ is configured to automatically select the best
cellular band to boost.
• A user may manually configure the system’s preferences
using the Cel-Fi WAVE app.
• A user may manually change the system’s Carrier config
and Mode between Mobile and Stationary via
Cel-Fi WAVE app.
NEMA 4 Rating
The Cel-Fi GO+ is NEMA 4 rated, and can be used both
indoors and outdoors. The NEMA 4 rating provides the
following advantages:
• A degree of protection against ingress of solid foreign
objects (falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain,
sleet, snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation
of ice on the enclosure
Review the latest authorized antennas at
www.cel-fi.com/antennas
Antenna and Mount Options:
LED
MEANING
Solid GREEN
The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED
The unit is in an error condition. Use the
Cel-Fi WAVE
app to
check the error code meaning and remedy.
Solid RED
The unit has a hardware error and is not booting up normally.
Cel-Fi GO+ All-in-One Smart Signal Booster
features an LED on the top face
to indicate the unit’s state:
NOTE: In mobile usage, it is normal for the
Cel-Fi GO+ All-in-One Smart
Signal Booster
to fluctuate between scanning and boosting. The
Cel-Fi GO+
All-in-One Smart Signal Booster
automatically adjusts its boost behavior
based on available signal.
ISSUE
MEANING
ACTION
Continual
Blinking
GREEN
Unit is
operational, but
not attaching to a
network to boost.
• Make sure both antennas are connected
properly and are appropriate for the desired
frequencies to boost.
• Make sure the selected operator to relay is
available at your location. This can be checked
with the
Cel-Fi WAVE
application. If the service
is not available, it cannot be boosted.
Solid
RED LED
Unit is not
operational.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for
remedy.
Troubleshooting
Specifications:
Frequency Support
Multiple variations of the product are available with
different frequency support.
Model:
G32-2/4/5/12/13
BAND
NAME
DOWNLINK
UPLINK
2
1900 PCS 1930
1990
1850
1910
4
AWS–1
2110
2155
1710
1755
5
850
869
894
824
849
12
700 a
729
746
699
716
13
700 c
746
756
777
787
Gain
Up to 100 dB system gain
Model:
G32-1/3/5/7/8/20
BAND
NAME
DOWNLINK
UPLINK
1
2100
2110
2170
1920
1980
3
1800+ 1805
1880
1710
1785
5
850
869
894
824
849
7
2600
2620
2690
2500
2570
8
900
925
960
880
915
20
800 DD 791
821
832
862
Gain
Up to 100 dB system gain
Dimensions
LENGTH
WIDTH
HEIGHT
WEIGHT
272.5 mm
96.5 mm
43.5 mm
850 g
Power (max)
DOWNLINK TX
UPLINK TX
10 dBm/5 MHz
(16 dBm per band)
24 dBm per band
Bluetooth (LE Ver 4.2)
FREQUENCY
POWER
2042 – 2480 MHz
0 dBm
Environmental
Operating Temp: 0 - 65
°
C
Relative Humidity: 95%
Antenna Connectors
SMA-Female
Certifications
3GPP TS 25.143 Rel.10
BQB (Bluetooth)
(All variants)
3GPP TS 36.143 Rel.10
NEMA-4
RoHS 2
(G32-2/4/5/12/13
FCC
CSA C22.2#62368-1
variants only
)
ISED
UL 50E, UL 60950-22
UL 62368-1:2014
CSA C22.2#60950-22
(G32-1/3/5/7/8/20
IEC 62368-1:2014
EN 301 908-1 v11.1.1
variants only)
EN 301 489-1 v2.1.1
EN 301 908 v11.1.2
EN 301 489-17 v3.1.1
EN 301 908 v11.1.2
EN 301 489-50 v2.2.0
EN 300 328 v2.1.1
EN 62311 (2008)
Regulation (EC) 1275/2008 (Standby and Off mode)
Regulation (EC) 278/2009 (External Power Supply)
Cel-Fi GO+ All-in-One Smart Signal Booster
