Nextiva S4100 Series
Installation Guide
www.verint.com/manuals
1
© 2007-2009 Verint Systems Inc. All Rights Reserved Worldwide.
March 12, 2009
This installation guide provides instructions for installing and performing
the initial configuration of the Nextiva
®
S4100 series wireless
encoder/transmitter and decoder/receiver in a point-to-point context. It
covers the S4100 and S4100-2V. For more information on specific
configuration, compliance to standards, and other aspects of the product,
refer to the Nextiva S4100 Series User Guide.
Installation Kit
The package contents are:
Hardware Overview
Front:
Note: The S4100 series device must be installed by certified
professionals.
Prior to deployment in the field, this wireless device requires
configuration and testing.
Item
Description
Wireless system
S4100 or S4100-2V, each made of a receiver
(-R) and transmitter (-T). Each device
includes an integrated antenna.
Mounting assembly set
One set per device for installation on a wall
or pole
Cable for video, serial
port, and power
Two cables for the S4100, four cables for the
S4100-2V
Printed material
This installation guide
Options
High-gain antenna
An external antenna; the available antennas
vary depending on the frequency band and
the country.
CABAA cable
A cable for alarm or audio
CABET-25 cable
An 82-foot (25-meter) outdoor Ethernet
cable with a weatherproof connector
CABET-50 cable
A 164-foot (50-meter) outdoor Ethernet
cable with a weatherproof connector
CABPV cable
A cable for video, serial port, and power
PS2440 power supply
An indoor-only 24V AC power supply
Note: You must use only antennas certified by Verint. You must enter the
antenna gain in the device to ensure that the combined
transmission power of the device and antenna does not exceed the
maximum value established by your country’s regulations. For
more information, refer to the Nextiva S4100 Series User Guide.
Item
Description
Integrated antenna
