72
www.nextel.com
Displaying Your Private ID
Using the Private/Group Speaker
You can enable or disable the speaker on your i2000plus phone for Nextel
Direct Connect use. (The default setting is Speaker On.) When the speaker is on,
the caller’s voice can be heard over the speaker. When the speaker is off, the
caller’s voice can only be heard through the earpiece of your phone.
Turning the Speaker Off
Turning the Speaker On
Placing Private Calls
From Private Mode, there are also two ways to reach an individual using Nextel
Direct Connect. You can enter the person’s Private ID number then press the
Push-To-Talk button. Or, you can store the person’s name and Private ID
number, then recall the number from a stored list. Whether you dial the person’s
Private ID directly or store it in a list—you must have the individual’s Private
ID to use Nextel Direct Connect. To learn how to store names and numbers, see
“Storing Names and Numbers” on page 23.
Entering the Private ID
1
Press
n
until you see the “Prgm” menu selection.
2
Press
o
under “Prgm” and press
2
.
Press
k
.
p
will appear on your display. A brief alert tone will notify
you of incoming Private or Group calls.
Press
k
.
1
Press
m
(the Mode key) until you see Prvt Ready.
2
Enter the Private ID.
3
Press and hold the Push-To-Talk button on the side of the phone to talk.
Both phones will chirp before your voice can be heard.
4
Release the Push-To-Talk button to listen.
