This pocket-sized ABS enclosure is a DIY kit for
assembling M.2 NVME/SATA SSD (PCIE-based), and
the speed is USB3.1 Gen2 10Gbps, which is specially
designed for mobility, with an ultra-portable design that
fits easily into your laptop bag.
Product Introduction
Features & Advantages:
Product Diagram
1. Ultra-high Speed
The USB 3.1 Gen 2 Port supports data transmission speeds
of up to 10Gbps for steady and efficient data transfer.
Backward compatible with USB 3.1 Gen1 and USB 3.0 at
respective speed limits. It provides transfer speeds of more
than 900MB/s, that's around 9x faster than traditional
external HDDs. Transfer and backup large-sized data files
and 4K videos in seconds.
2. Never slow down
It will keep a high speed even after several hours of
continuous work.
3. Auto Sleep (10 mins)
For energy-saving & reducing power consumption & heat
dissipation & prolonging SSD life.
4. Low Temperature
The Master IC works at lower temperatures.
The high-quality ABS shell with UV coating, provides the
sense of tactility temperature is being minimised.
5. Easy Setup
Hot-swappable; Fully bus powered; Plug and Play;
No Driver required.
6. Broad Applicability
It works for mobile phones, tablets, laptops, desktop
computers and other hosts that are equipped with USB
Type-C and Thunderbolt 3 ports.
7. Special Applicability
Only applicable for M.2 NVMe M-Key or B+M Key SSD
(PCIE-based). DOES NOT support M.2 SATA based SSD
(NGFF). Applicable to 4 sizes of SSD: 80mm (2280), 60mm
(2260), 42mm (2242) and 30mm (2230).
8. System Compatibility
Support Windows 7 or above, Mac OS 10/10.5 or above,
Linux, Android, iOS
UD����说明书
USB-C
LED
Installation
Package Information
1
3
Connection
Notebook
Tablet PC
Mobile
USB-C
Notes:
1. Only support NVME/SATA M-Key or B+M Key M.2 SSD
(PCIE-based).
2. To utilise the 10Gbps data transmission rate, the USB 3.1
interface on source device should be USB 3.1 Gen 2. For
some sources, that comes with USB 3.1 Gen 1, then the
max speed is 5Gbps.
3. It is normal for the case to heat up since the high-speed
NVME/SATA M.2 drives generate a lot of heat while
working.
4. Most of the new SSDs need to be initialised, partitioned
and formatted.
ABS with UV plating
USB 3.1 Gen2 up to 10 Gbps
M.2 NVME/SATA to USB 3.1 Gen2(USB-C)
2TB Max.
M.2 NVME/SATA M Key, B+M Key (PCIE based)
2230, 2242, 2260, 2280mm
Windows/Mac OS/Linux/Android/iOS
White LED
Product Material
Transfer Rate
Interface Type
SSD Capacity
Support SSD Protocol
Support SSD Size
Support System
Indicator Light
1 x M.2 NVME/SATA SSD external enclosure
1 x USB-C to C cable
1 x User manual
2
XC5908
USB Type-C
External M.2 SATA/
NVME SSD Case
USB Type-C
External M.2 SATA/
NVME SSD Case
Instruction Manual
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China
