THE FCC WANTS YOU TO KNOW
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. Where shielded interface cables have been provided with the product or specified
additional components or accessories elsewhere defined to be used with the installation of the product, they must be
used in order to ensure compliance with FCC regulation.
This Class B digital apparatus complies with Canadian ICES-003.
8000945
User Manual
SD
USB
THE SOURCE WARRANTY
The Source warrants that this product will be free from defects in materials and workmanship for a
period of one (1) year from the date of purchase. Within this period, simply take the product and your
proof of purchase to any The Source store or dealer and the product will be repaired without charge
for parts and labour. The Source reserves the right to charge for transportation. Any product which has
been subject to misuse or accidental damage is excluded from this warranty.
This warranty is only applicable to a product purchased through The Source company owned stores
and dealers and to a product that is presented for repair in a country where The Source offers the
product for sale. While this warranty does not confer any legal rights other than those set out above,
you may have additional statutory rights which will vary under the laws of the various countries, states,
province and other governmental entities in which The Source operates. This warranty is subject to all
statutory rights you may have in the country of purchase.
LIMITED WARRANTY
© 2015
The Source
.
All Rights Reserved.
1. FEATURES
• Compliant with USB specification 1.1 & 2.0
• Reads a wide range of memory cards; such as SD, SDHC, Mini SD, Mini SDHC,
RS-MMC, Micro-SD, Micro SDHC, MS Duo, M2, etc.
• Hot swappable and Plug & Play capability.
• Memory card slots can be used at the same time for data exchange within Micro
SD and SD slots (excludes MS and M2 slots)
• USB powered, no external power supply required.
2. SYSTEM REQUIREMENTS
• A computer with one available USB port.
• Windows 98SE/2000/XP/Vista/7/8, Mac OS V10.4 or above, Linux Kemel 2.4 or
above.
3. PACKAGE CONTENTS
• 1 x SD Multi Card Reader
• 1 x User Manual
4. MEMORY CARD SLOT
The card reader provides four slots for different types of media memory cards. You
must load each media card in the correct slot. Do not attempt to insert the card in
the reverse direction by force. Inserting in the wrong slot or wrong direction may
damage your memory card and card slot. Please read the following description and
illustrations clearly before using the card reader.
4. MEMORY CARD SLOT
5. PRODUCT SPECIFICATIONS
This slot labeled as “SD/miniSD/MMC/RS-MMC” can accept Secure Digital (SD),
Secure Digital High Capacity (SDHC), mini SD, Multi media or RS MMC cards, etc.
(The mini SD card should be loaded from the middle of the slot and requires an
adapter to be read.)
• SD/MMC
This slot labeled as “MS/MS Duo” accepts Memory Stick, MS Pro, MS Duo, MS
Pro Duo, and MS Micro memory cards.
• MS/MS Duo
• LED Indicator Description
The card reader has an LED status
indicator for power and data access.
Power On: The red LED indicator will
be lit when reader is linked by USB port.
Note: Please do not remove any of the inserted
media memory card(s) while data is being
transmitted between the PC and the card reader
or when the access green indicator is flashing.
This may cause your computer to crash and
you may lose valuable data.
Built-in USB cable never gets lost or misplaced
Data Access: The red LED indicator will flash while data transmitting.
Manufactured in China
The MicroSD slot accepts MicroSD/T-FLASH memory cards without an adapter.
• MicroSD
The slot labeled as “M2” accepts M2
memory cards without an adapter.
• M2
SPECIFICATIONS
Standards Compliant
Four Memory Slots
Supported Media Card
Indicators
Interface
System Support
Operating Temperature
Storage Temperature
Operating Humidity
Certification
Specifications are subject to revision or update without notice.
USB specification Rev. 2.0, USB mass storage class drive
Micro SD/M2, SD/MMC, MS/MS Duo
Secure Digital (SD), Secure Digital High Capacity (SDHC), MultiMediaCard(MMC), MMCplus, Memory
Stick PRO, Mini SD, Mini SDHC, MicroSD, MicroSDHC, MMCmobile, RS-MMC, MMCmicro, Memory
Stick Duo, Memory Stick PRO Duo, Memory Stick MICRO(M2)
One power on indicator, One media card detect and data access indicator
5-pin mini USB support USB 1.1/2.0
Windows 98SE, XP, VISTA 32/64bit, Windows7, Windows 8
Linux OS 2.4.X or above, Mac OS 10.4 or above
0°C ~ 40°C
-20°C ~ 60°C
0% ~ 80% RH, non-condensing
FCC Class B, CE
DISCLAIMER
We made every effort to ensure that the information and procedure in this guide is accurate and
complete. No liability can be accepted for any errors or omissions and we reserve the right to
make any changes without further notice to any products herein.
MS/MS PRO/MS DUO/
MS PRO DUO
Micro SD
SDHC/SD/MMC/RS-MMC/Mini SD
Please Recycle
Imported by The Source
Barrie, Ontario, Canada, L4M 4W5
Manufactured in China
www.thesource.ca
