Next OPUS Assembly Instructions Manual Download Page 1

Tools Needed

Helpline

If you have any problems with this product  or require any 
replacement fittings please contact Customer Services 
Tel: 0844 844 8999

  by-step instructions. 

• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.

• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or 
warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

ASSEMBLY INSTRUCTIONS.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be 
faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-

• Carefully check that you have all parts before beginning assembly.

• For general cleaning, periodically dust with a soft cloth.

PRODUCT INFORMATION

• Made from MDF & partical board with a wood effect finish.

CARE INSTRUCTIONS

• Made in China

• Do not put hot dishes directly on the surfaces of the item.

• Do not use furniture polish.

• Do not rub or scrub the surface when cleaning.

• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or 
damage.

OPUS  TALL CORNER SHELVES

Page 1 of 6

Summary of Contents for OPUS







Reviews: