NEXT
HFA
206L -
User Manual
www.next-proaudio.com
- 4 -
V201703
•
Do not use hardware that isn’t load rated or that its’ rating is not enough to handle the
system’s weight with a good safety factor (minimum 4:1).
•
Suspended systems installation should only be carried out by qualified personnel.
•
Always use adequate protective clothing and equipment to prevent possible injuries.
•
Be sure you understand all local and national regulations regarding equipment
installation.
HFA206L
The HFA206 is the only HFA series speaker that has a
100V Line version. Able to deliver an extremely high
output and dynamics for its size, extreme linearity and
fidelity, is one of the best solutions in terms of
price/quality ratio in the market. A built-in passive
crossover with 100V transformer, connected on the
screws connector, provides the perfect frequency and
phase response. It is advisable to operate it with a high
pass filter at 85 Hz in a full-range operation mode.
HFA206L provides 5 power taps (100W, 75W, 50W,
25W and 12.5W). The common wire (black) must be
always connect on the first connector’s position
(COM). The positive wire (red) must be connected on
one of the free connector’s position, according to the
desired power tap.
