Next BARLOW BOOKCASE 804833 Assembly Instructions Manual Download Page 1

Tools Needed

Helpline

If you have any problems with this product or require

any replacement fittings please contact Customer

Services Tel: 0844 844 8999

  warping.

• All assembly fixings should always be tightened properly 
and periodically check all fixings and tighten if necessary.

• Made from particleboard,MDF with a wood effect finish.
• Made in Indonesia.

• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.

ASSEMBLY INSTRUCTIONS.

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found 

to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

• Never drag pieces of furniture across the floor as this will cause damage to the joints.

• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.

PRODUCT INFORMATION

• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or 

• Do not put hot dishes directly on the surfaces of the item.

• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or   
damage.

• Ensure the mats and coasters used do not have an abrasive surface underneath.

804833          BARLOW BOOKCASE 

1

11

2

3R

3L

4

5

5

6

9

11

2

3R

3R

9

9

5

6

2

3R

10

10

10

2

9

10

10

10

2

3L

9

3R

10

9

10

10

3L

2

5

2

3L

6

10

10

3R

1

3R

1

10

3R

12L

12R

3R

12L

8

2

5

7

3L

6

7

1

12R

2

3R

9

10

10

10

3L

1

1 of 12

Summary of Contents for BARLOW BOOKCASE 804833













Reviews: