background image

Tools Needed

Helpline

If you have any problems with this product or require

any replacement fittings please contact Customer

Services Tel: 0844 844 8999

• For general cleaning, periodically dust with a soft cloth.

• A minimum of 2 persons is required to assemble this product.

• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.

  or damage.

• Do not put hot dishes directly on the surfaces of the item.

PRODUCT INFORMATION

• Made from particleboard,MDF with a wood effect finish.

ASSEMBLY INSTRUCTIONS.

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found 

to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

• Made in Indonesia.

CARE INSTRUCTIONS

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 
• Carefully check that you have all parts before beginning assembly.

• Do not rub or scrub the surface when cleaning.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent 
scratching    

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.

• Ensure the mats and coasters used do not have an abrasive surface underneath.

• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or 

  warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.

824328       BARLOW CONSOLE BOOKCASE

1

3L

3R

4

10

6

5

7

2

8

6

10

4

10

 6

10

6

4

7

8

3R

3R

8

7

                                10  

7

6

5

3L

3R

8

3L

7

7

10

6

5

11

8

 

3L

6

11

1

3R

3R

1

3L

8

6

2

3R

2

1

1

2X

14

12

13L

13R

2X

13L

13R

13R

14

13L

2X

UNFINISHED

SIDE

13L

14

13R

15

2X

13L

12

14

15

13L

13R

12

2X

13R

12

14

13L

15

13R

6

12

8

12

4

3L

9

3R

1

6

10

3R

11

5

11

11

1

11

3L

11

3L

90

0

3L

11

3R

11

6

1

11

11

1

1 of 11

Summary of Contents for BARLOW 824328












Reviews: