background image

Tools Needed

Helpline

If you have any problems with this product or require 
any replacement fittings please contact Customer 
Services Tel: 0844 844 8999

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.

• Please do not apply adhesive substrates to the product, e.g. sticky tape.
• If a spillage does occur, blot any liquids immediately with a clean, dry absorbent cloth and allow to dry naturally.

• Clean periodically in situ using a professional cleaning company.

• For more stubborn stains a professional upholstery cleaner should be consulted.

ASSEMBLY INSTRUCTIONS.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found 
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

PRODUCT INFORMATION

IMPORTANT

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.

• We recommend that the packaging is used to protect the surfaces during assembly.

• 

Foam is supplied to protect the front face. Do use the foam to protect the main face during assembly.

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

• Carefully check that you have all the parts before beginning assembly. 
• Keep fittings out of children’s reach and keep children well away from construction area.

• Care should be taken to avoid spilling anything on the upholstery. If a spillage occurs act promptly and soak up any 
liquids by blotting with a clean absorbent cloth. Never rub to remove stains. Never use a wet cloth.

• A minimum of 2 persons is required to assemble this product.

• Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources such as 
radiators.

• Fabric content - 50% Cotton, 50% Polyester.

• 

Made in China.

• Regular cleaning is essential to avoid build up of these products on the surface.

• Foam is supplied to protect the front face. Do use the foam to protect the main face during assembly. 

CARE INSTRUCTIONS

• Hair products such as hairsprays, oils and gels may affect the finish. Avoid prolonged contact with such products.

ANTOINETTE STORAGE BED 781396 

Page 1 of 5

Summary of Contents for ANTOINETTE 781396






Reviews: