Next 896225 Assembly Instructions Manual Download Page 1

Tools Needed

Helpline

If you have any problems with this product or 
require any replacement fittings please contact 
Customer Services Tel: 0844 844 8999

• Made from MDF with a painted finish.

• Do not rub or scrub the surface when cleaning.
• Always use a non-silicone based furniture polish. Silicone in furniture polishes can break down the lacquer finish.

• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent 
scratching or damage.

• For general cleaning, periodically dust with a soft cloth.

• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or 
warping.

• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.

• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
• Not suitable for use in bathrooms.

• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.

• Made in China.

PRODUCT INFORMATION

• Do not put hot dishes directly on the surfaces of the item.

CARE INSTRUCTIONS

• Never drag pieces of furniture across the floor as this will cause damage to the joints.

ASSEMBLY INSTRUCTIONS.

Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found 
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.

IMPORTANT

• Wall fixings are not included.

• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of 2 persons is required to assemble this product.

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

• Keep fittings out of children's reach and keep children well away from the construction area.

• Carefully check that you have all parts before beginning assembly.

• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 

896225  ASHTON DESK

 

Page 1 of 8

Summary of Contents for 896225









Reviews: