10Ge iSCSI Information
If your Nexsan High-Density Storage system is configured for 10Gb Ethernet iSCSI connectivity, clicking
RAID Information > 10Ge Info
takes you to the
10G iSCSI Information
page, which provides an information
summary for each 10Gb Ethernet iSCSI port on each RAID Controller in the system.
On units with two 10Ge iSCSI ports per controller, the
10G iSCSI Information
page looks like this:
Figure 3-28:
10Ge iSCSI Information
page (for units with two ports per controller)
On units with four 10Ge iSCSI ports per controller, the
10G iSCSI Information
page looks like this:
Figure 3-29:
10Ge iSCSI Information
page (for units with four ports per controller)
The information is arranged by controller and host port. For each, the following information is displayed:
Table 3-6: 10Ge iSCSI Information
Item
Contents
Target Name
Displays the name of the 10Ge iSCSI target.
IP address
Displays the IP address of the 10Ge iSCSI port.
TCP port
Displays the TCP port that 10Ge iSCSI is using.
Chapter 3: The Graphical User Interface — RAID Information
Nexsan High-Density Storage
User Guide
82