Nexsan BEAST Series, User Manual, Page: 36 / 267

Volume Configuration and Access
Although default volume and host access configuration is performed during Basic or Expert Quick Start, you
may wish to change settings for individual volumes. To do so, click the
Change Volume Mapping button.
This takes you to the Map Logical Volumes page.
Figure 1-19: Map Logical Volumes page
Each volume information section lists the volume number, current volume name, the array the volume belongs
to, the controller that the array is assigned to, the enclosure (if there is more than one), the volume’s capacity,
and the volume’s host port assignments (see
Configure volumes on a RAID array on page 45).
Chapter 1: Basic Setup — Set up the system
Nexsan High-Density Storage
User Guide
www.nexsan.com
36