Nexsan BEAST Series, User Manual, Page: 137 / 267

Acknowledge Rebuild
Clicking Configure RAID > Rebuild Ack takes you to the Acknowledge Rebuild page. When a RAID array
has been rebuilt after a component disk failure, this page displays a warning and allows you to acknowledge
that you have seen it.
When no recent RAID array rebuilds have taken place, the Acknowledge Rebuild page looks like this:
Figure 3-83: Acknowledge Rebuild page with no rebuild message
When a RAID array has been recently rebuilt, the Acknowledge Rebuild page looks like this:
Figure 3-84: Acknowledge Rebuild page with rebuild message
Click the Acknowledge RAID Array Reconstruction button to acknowledge the rebuild. A message is
displayed, confirming the acknowledgment. Click the Back button to return to the Acknowledge Rebuild page.
Note RAID array reconstruction warnings also appear on the Home page and can be acknowledged from
there (see Home page on page 57).
The Require Rebuild Acknowledgment section allows you to set the rebuild acknowledgment mode.
When Array rebuilds must be manually acknowledged is selected (the default), array rebuild
notifications will appear on the Home page and on the Acknowledge Rebuild page, and the Acknowledge
RAID Array Reconstruction button must be pressed to clear the message.
When Array rebuilds do not require acknowledgment is selected, array rebuild notifications do not appear
on the Home page or the Acknowledge Rebuild page and only appear in the Event Log.
Select the option that you prefer and press the Set Acknowledgement Mode button.
Chapter 3: The Graphical User Interface — Configure RAID
Nexsan High-Density Storage
User Guide
www.nexsan.com
137