PAGE 2 OF 3
- Read t his docum ent before using.
- Keep t his docum ent .
- Observe all warnings and caut ions.
Dimensions:
Use:
Place MNSTKM6 in the M20 Footprint of the MSUB12.
Place GMT-BUMPER above MSUB12 and align one hole of it with
MNSTKM6.
Insert the clevis pin and secure with
“R” clip.
Connect bottom cabinet to GMT-BUMPER at required vertical angle with 4 x VXT-BL515 quick release pins
NB: Bottom cabinet angle can be adjusted from -7° to 0° in relation to MSUB12.
Connect subsequent cabinets at required inter-angle values with 4x VXT-BL515 quick release pins.
Ensure that the clevis pin is properly locked in VNT-MNSTKM6, and that 5mm pins are properly locked in
GEO M6.
•
NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.